Blog

Home >> Blog

Simple rubber floor cleaning tips
Simple rubber floor cleaning tips

Simple rubber floor cleaning tips

cleaning tips    Jan 02,2018

One of the best qualities of the rubber floor is the fact that it is extremely durable and low maintenance. Most liquids will not stain or damage the surface, and it is relatively difficult to damage the material with physical impact, due to its elastic but flexible nature. The rubber floor is also resistant to burns and is not susceptible to mold or mildew. Dirt rest gently on the surface of a rubber floor, which facilitates sweeping. For this reason, rubber tiles are used in various places like kitchens, bathrooms, hospitals, playgrounds, and gyms. However, there are some basic rubber floor cleaning and maintenance steps that you must follow regularly, both to disinfect the floor and to maintain its optimal appearance.

 

Initial Cleaning

 

floor cleaning

 

Rubber floor is fixed with gummy parts, to clean the sticky unnecessary parts will take minimum 72 hours after installation to give the sticking time to be firm. After three full days, you can consider the complete installation and you can treat the floor normally, with the following basic floor cleaning instructions. (With click products and static weight products that do not use adhesives, these precautions are not necessary).

 

Rubber floor maintenance

 

floor cleaning

 

The most common maintenance problem with a rubber floor is dirt and small debris that gets into shoes and boots or gets through windows and air ducts. This is a natural occurrence that can be minimized by using carpets at the entrance and exit of each room. Unfortunately, these small spots can be quite abrasive, and if they are not removed, they can wear out the finish of the floor cleaning over time.

 

Cleaning the floor daily with the help of sweeping and vacuuming then it is a simple way to avoid the debris is easy. The frequency will depend on how often space is used and how it is used. The more often you perform this simple maintenance task, the longer your rubber floor will maintain its original luster and shine.

 

Mopping a rubber floor

 

moping the floor

 

If you have a stain embedded in the rubber floor, you can wash it with a mop without worrying about damaging the material. Just make sure that any cleaning agent you use is not acidic or acetone-based, and does not contain turpentine. These substances can stain a rubber floor, causing permanent and irreparable damage. To get a natural and economical rubber floor cleaning solution, mix a cup of white vinegar in a gallon of hot water. This solution can be applied with a mop, a sponge or a cloth to floor cleaning and disinfect the floor. Add a splash of lemon or a few drops of the essential oil of your choice to the mixture for a fragrant effect.

 

A mild dish soap can be substituted for vinegar in this solution. You can also mix them all together to create an even more powerful cleaner. As always, the ratio of water to cleaning agent will determine the concentration and effectiveness of the cleaner. In all cases, the water used must be hot, and the mixture must be changed frequently to keep it clean. May the rubber floor have a stubborn stain that is deeply depressed, then use a concentrated floor cleaning solution with a hand brush and apply extra pressure to the floor? You should clean vigorously, you want to make the floor clean then sure you do not press so hard that the excited heal the floor.

 

Things to avoid when cleaning rubber flooring

 

floor cleaning

 

Any chemical cleaner based on acid or acetone or any solution containing turpentine may stain your floor. Cleaning pads and steel wool sponges can be slice and cure the rubber surface, damaging the floor at the floor cleaning process.

 

Concerns about rubber floor water

 

floor water

 

Unlike some floor coverings, rubber is not affected by moisture during cleaning and mopping. Once finished, let the soil air-dry for a nice, no-trace finish. Be aware that if your rubber flooring is installed on a plywood subfloor, allowing water to stagnate on the joints between the tiles will allow moisture to escape, causing mold or wood rot. This can be avoided if, during installation, you install a vapor retarder underlayment.

 

Polish rubber floors

 

polish rubber floors

 

A rubber floor conditioner can be applied to the floor surface, either with a cloth by hand or using a professional grade polisher. If you use a machine, make sure that it operates at less than 350 rpm, otherwise, you may damage the floor. Periodic conditioning will help restore the luster that your rubber floor had when first installed. An inexpensive alternative is to mix a cup of fabric softener in one gallon of water and mop it on the floor. Done on a regular basis, this should help restore some of the original glow.

 

Stains on a rubber floor

 

stain remove

 

Stains are the main problem for rubber flooring, causing stains that simply cannot be removed using conventional methods. In these cases, a large amount of white toothpaste should be applied to the affected area. Let it dry for 10-15 minutes, then washed with warm, clean water. This can be done several times until the stain is removed.

  • Share: