Home >> Blog

Floor cleaning : Simple methods to clean a stone floor
Floor cleaning : Simple methods to clean a stone floor

Floor cleaning : Simple methods to clean a stone floor

cleaning tips    Dec 15,2017

The stone floor presents a dazzling and expensive inversion of floors, so it is especially important to use appropriate floor cleaning solutions and methods to take care of it. General floor cleaning cleaners such as ammonia and bleach can damage stone floor tiles, while the use of natural stone solutions and methods ensures that their beauty is not only maintained but also improved.

Easy Methods


easy methods


Dirt, sand and other debris that accumulates on your floors will be removed as frequently possible to ward off scratches and damage to the stone. Use a soft bristle broom to sweep these materials off the ground. If you are using a vacuum cleaner, adjust the setting on bare stone floors to prevent its flapping bars from pounding the textured surface of stone tiles, which can be detrimental to them. When bulk materials are removed from the ground, use a damp mop to floor cleaning at least once a week, if not more, to maintain the natural beauty of the stone floor. An old-fashioned mop does the work.





Dilute soft soaps such as a 1/4th cup of vegetable-based natural soaps, or any dishwashing detergent or 1/4th cup of coconut soap peels and vegetable oils in a cup of warm water. You can also fill the 1/4th cup of castella soap based olive oil and mix it in a bucket of warm water for floor cleaning. Moisten the solution on the stone floor for routine cleaning. Rinse the floors thoroughly with clean water to make sure there is no film on the surface of the stone and dry with a soft cloth. Don't use oils and waxes to clean the stone floor. Solutions that include vinegar, ammonia, and lemon juice are acidic and opaque or erode the surface of calcareous stones, such as limestone, travertine, and onyx, marble and serpentine. Do not use them as cleaners for stone floors.

Maintain Natural Beauty


maintain clean


Remove spills that occur on your stone flooring as soon as possible. Pay particular attention to dark coloured spills such as wine or juice, pet crashes, and oil. Blot rejects with a paper towel and washes the area with natural soap mixtures, water, and a damp cloth. Rinse several times and dry with a cloth. To clean up oil spills, create a paste with water and baking soda and apply on the stain approximately 1/4 to 1/2 inch thick. Let stand for 24 to 48 hours before removing with a damp cloth. The mixture draws the oils from the stone floor at floor cleaning. If the stain persists, repeat the process. To prevent annoying materials from being followed on your stone floor, which hurts its surface, place carpets or mats at the entrance to your house.

Remove the Grout


removing grout


The grout is particularly good at attracting dirt and grime and keeping it captive among the stone tiles. To make a solution to clean the grout between the stone, mix three parts of baking soda with one part of water. For example, mix three cups of baking soda with one cup of water. Apply the mixture to the grout and let it stand for at least 10 minutes. Rinse with warm water using a cloth. Specific floor cleaning brushes are also available with a narrow row of bristles to scrub the grout to remove stains and dirt more aggressively.

  • Share: